466 laboratory sm 1500 series 1500 watts programmable dc supply features ? constant voltage and constant current operation ? parallel operation master/slave ? emc standard en61204-3 ? ce marked ? optional ethernet, rs232, ieee 488 programming ? designed for long life at full power operating efficiency 87%?91%. switching frequency 100khz. thermal protection yes. programming analogue programming of voltage and current by 0-5v. programming speed see table. master/slave operation parallel and series operation with equal current and voltage sharing. in this way two or more sm- units can together be used as one high power unit. voltage and current of the units is controlled by the master (by potentiometers or by programming). series operation up to 600v. metering digital meters standard. indicators cv/cc mode, ovp triggered leds. battery charging the cv/cc regulated power supplies are very suitable for battery charging. ask for the special datasheet ?battery charging with sm-series power supplies?. this datasheet contains information about protective measures against accidental battery reversing. environmental operating temperature -20c to 50c. cooling low noise blower, fan speed adapts to temperature of internal heatsink. (from left to right). standards and approvals safety standards en60950 / en61010 emc standards en61204-3, en61000-6-2 emi standards en61000-6-3 (en55022b) mechanical mounting bench or 19" rack mounting specifications input input voltage 90-265vac frequency 48hz?62hz inrush current 27a @ 115vac, 22a @ 230vac. power factor 0.99 isolation i/p to o/p: 3.75kvrms (1min.), creepage: 8mm i/p to case: 2.5kvrms, o/p to case: 600vdc output output voltage see table. output voltage adjustment 0%?100% output current see table. output current adjustment 0%?100% resolution 0.03% voltage and current control with 10 turn potentiometers. overload protection yes short circuit protection yes temperature coefficient cv: 35x10 -6 per c, cc: 60x10 -6 per c load regulation 0%?100% load ? see table line regulation line 10% ? see table ripple & noise see table stability cv: 6x10 -5 , cc: 9x10 -5 output impedance (0-1khz; 1-100khz) sm15-100: < 1.3m ; < 25m sm35-45: < 1.7m ; < 30m sm52-30: < 3.5m ; < 30m sm52-ar-60: < 3.3m ; < 40m sm70-20: < 7.5m ; < 30m sm120-13: < 63m ;< 0.6 sm300-5: < 125m ;< 1 sm400-ar-8: < 83m ;< 1.3 recovery time (50%?100% load step): 100s. remote sense 2v max. per lead compensation.
your dependable power partner ? www.powerbox.com.au 467 laboratory sm 1500 series 1500 watts programmable dc supply model number output voltage (0v to) output current (0a to) ripple & noise cv cc programming speed (0v to v max.) load reg. 0%?100% cv cc line reg. 200?264vac cv cc sm15-100 15v 100a 8mvp-p 80ma 0.20ms (100% load) 0.5mv 5ma 0.2mv 1ma sm35-45 35v 45a 8mvp-p 15ma 0.27ms (100% load) 1mv 3ma 0.5mv 0.5ma sm52-30 52v 30a 15mvp-p 10ma 0.31ms (100% load) 2mv 1.5ma 0.7mv 0.5ma sm70-22 70v 22a 15mvp-p 10ma 0.47ms (100% load) 2.5mv 1ma 1mv 0.25ma sm120-13 120v 13a 30mvp-p 6ma 0.46ms (100% load) 4mv 0.6ma 2mv 0.2ma sm300-5 300v 5a 50mvp-p 4ma 1.0ms (100% load) 10mv 0.5ma 3mv 0.1ma sm52-ar-60 0-26v 26-52v 60a 30a 15mvp-p 30/10ma 0.44ms (100% load) 0.53ms (100% load) 2mv 2ma 0.7mv 1ma sm400-ar-8 0-200v 200-400v 8a 4a 80mvp-p 6/3ma 0.35ms (100% load) 0.98ms (100% load) 12mv 0.5ma 4mv 0.2ma selection table options screwdriver adjustment - option p001 master / slave operation battery charging - sm52-30: p197, sm52-ar-60: p198, sm120-13: p199, sm300-5: p200, sm400-ar-8: p201. increased max. output voltage / current - option p069 enforced secondary isolation 1000v - option p089 high speed programming - sm15-100: p210, sm35-45: p211, sm52-30: p212, sm52-ar-60: p213, sm70-22: p214, sm120-13: p215, sm300-5: p216, sm400- ar-8: p217. power sink for 2 quadrant operation - sm15-100: p202, sm35-45: p203, sm52- 30: p204, sm52-ar-60: p205, sm70-22: p206. built-in iso amp card for isolated analog programming - option p218 built-in ethernet power supply controller - option p177 built-in rs232 power suply controller - option p183 built-in ieee488 power supply controller - option p184 technical illustrations
|
